EDT1700T 17" EnduraTouch II Enclosed Computer
17" EnduraTouch II Fully Enclosed, Stainless Steel Computer
The Nematron EnduraTouch II is the latest update to the original EnduraTouch Series launched by Comark in the early 2000’s. The EDT1700T is a 17” fully-enclosed computer with a stainless steel enclosure and many great features for using this product in industrial automation applications.
The EnduraTouch II EDT1700T is intended for use in areas where the NEMA 4/4X, IP66 rating is required, such as in food processing or chemical plants that utilize washdown sprays for cleaning equipment.
The EDT1700 comes with a chemically-strengthened analog resistive touchscreen, a Fanless, Intel Quad Core ATOM E3845 CPU board and Solid State Drive storage, and has been tested and proven to run up to 60°C temperature specs. The EDT1700T is ETL Approved to UL61010 & CSA61010 Ordinary Locations.
Resolution: SXGA, 1280 x 1024
Brightness: 350 nit
Viewing Angle (H/V): 170°/170°
Colors: 16 million
Contrast Ratio: 1000:1
Backlight: LED
Screen Protection: Chemically-Strengthened Glass
Touchscreen: 5-wire Analog Resistive
Processor
Type & Processor: Intel Quad Core ATOM E3845
CPU: 1.86 GHz, 1MB Cache, 4 Threads
Operating System: Windows 7 Professional (32-bit) pre-installed; optional Windows 7 Ultimate (64-bit), Windows 10 Enterprise IoT (32-bit or 64-bit)
I/O Interface
I/O Ports: (2) Gigabit (10/100/1000) Ethernet ports, (1) RS-232/422/485 serial port (jumper selectable), (3) RS-232 serial ports, (4) USB 2.0 ports
Peripherals
Storage: 240 GB SATA Solid State Drive; optional 480 GB SATA or 960 GB SATA Solid State Drives, or 1TB SATA Hybrid Hard Drive
Memory: 4 GB DRAM; optional 8 GB DRAM
Dimensions
Dimensions (inch): 16.0” x 13.33” x 4.95”
Dimensions (mm): 406.4mm x 338.58mm x 125.73mm
Weight: 22.0 lbs (9.98 kg)
Mounting: VESA, 100 x 100 on rear of enclosure; Custom mounting – Covered and sealed mounting holes on sides can be used for custom mounting applications
Material
Enclosure: Stainless Steel Fully Enclosed
Electrical
Voltage: Integrated 100-240 VAC; optional isolated 24 VDC
Power Consumption: 50 Watts
Certifications
NEMA Rating: NEMA 4/4X, IP66 Sealed Dust Caps for I/O connectors (N/A on power connector)
FCC: 47 CFR, Part 15, Class A
EU CE Marking: CE, EN 55011: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1
Agency Approvals: ETL Approved to UL61010 & CSA61010 Ordinary Locations
Environmental
Temperature operating: 0 – 60°C
Options
Cables and Kits Sold Separately:
CBL-EDT-USB2-IP66-5M: IP66 Dual USB 2.0 Cable for EnduraTouch II, IP66 rated (one end only), 5M length (2 max required on EnduraTouch II)
CBL-EDT-ENET-IP66-5M: IP66 Ethenet Cable for EnduraTouch II, IP66 rated (one end only), 5M length (2 max required on EnduraTouch II)
CBL-EDT-SER-IP66-5M: IP66 Serial Cable for EnduraTouch II, IP66 rated (one end only), 5M length (4 max required on EnduraTouch II)
CBL-EDT-I/O-IP66-5M: I/O cable set for Enduratouch II, All cables are IP66 rated (one end only), Includes two dual USB 2.0, four Serial, and two ENET, All 5M Length. Note: does not include PWR cable
CBL-EDT-PWR-IP66-2M: IP66 Power Cable for EnduraTouch II, IP66 rated (one end only), 2M length (flying leads that need to be wired differently for AC and DC power)
50-16854-001: Connector Kit for field wiring connections to the EnduraTouch II; includes One power connector, Six connectors for Ethenet and/or Serial, and two connectors for USB. Also includes connector pin out diagrams. NOTE: These are the connector housings only and do not include any cabling
24-17267-001: One (1) Connector housing only for field wiring of Power to the EnduraTouch unit. Note: Consult EnduraTouch II manual for pin out diagram
24-17263-001: One (1) Connector housing only for field wiring of Ethernet and/or Serial Ports to the EnduraTouch II unit. Note: Consult EnduraTouch II manual for pin out diagram
24-17266-001: One (1) Connector housing only for field wiring of USB ports to the EnduraTouch II unit. Note: Consult EnduraTouch II manual for pin out diagram
